Installation Guide

Step-by-Step Application Process

1. 01

   Creating a smooth, flat surface

   You need a smooth and flat surface to apply the film. As such, if your surface isn’t smooth, it just won’t stick!

2. 02

   Apply the primer on the surface

   For better adhesion, you need a primer. First, the surface, then apply around edges and corners, and then, sand gently when dry. Primer application requirements can vary depending on the surface.

3. 03

   Measure and cut the interior film

   Before removing the adhesive backing, you must prepare the film sections. Accuracy here ensures that the patterns align correctly and that you have enough material to cover edges and corners.

4. 04

   Peel off and release the backing

   Peel off about 4 inches off of the backing, attach it to the surface, and pull the backing as needed. Make sure that you are aligned correctly.

5. 05

   Stick em up!

   Use a squeegee or something similar to firmly adhere the film from top to bottom using a fan-shaped sweeping motion.

Video Installation Tutorial